Step 1: Unpack the Media Player Remove the media player from its packaging and carefully unpack all the components. These components may include the media player device, power adapter, HDMI or AV cables, remote control, and any other accessories provided.
Step 2: Connect to Display Identify the type of display you will be using (e.g., TV, monitor, or digital signage display) and the available ports on both the display and the media player. Connect one end of the HDMI or AV cable to the corresponding port on the media player and the other end to the matching port on the display. Make sure the connection is secure.
Step 3: Connect to Power Plug the power adapter into the media player and connect it to a power outlet. Ensure that the power source is stable and provides the necessary voltage for the media player to function properly. Once connected, the media player should power on automatically.
Step 4: Configure Display Settings On your display device, select the appropriate input source to display the content from the media player. This could be HDMI 1, HDMI 2, or any other labeled input that corresponds to the port you connected the media player to.
Step 5: Navigate the Setup Wizard After powering on, the media player may guide you through a setup wizard. Follow the on-screen instructions to configure essential settings such as language selection, network connectivity (if applicable), date, time, and any other preferences required.
Step 6: Install Navori QL Player Software If the media player requires you to install the Navori QL Player software, you'll need to follow the instructions provided by Navori. This might involve downloading the software from the official website, transferring it to a USB drive, and installing it on the media player. Refer to the specific instructions provided by Navori or consult their support team for detailed steps.
Step 7: Activate the Player Similar to the software installation guide, you will need to activate the Navori QL Player on the media player. Obtain the license key from CanadianSmartSystems Navori work order and follow the instructions provided to activate the player. This step may vary depending on the specific media player model and software version you are using.
Step 8: Content Management Once the media player is set up and activated, you can start managing your digital signage content using the Navori QL software. Create playlists, schedule content, and ensure that the media player is connected to the internet (if required) to receive updates and remote content management.
Remember to consult the user manual or documentation provided with your specific media player model for any additional instructions or troubleshooting tips.
