To program your DSC Alarm Pannel, you must know the installer/dealer code. To verify if it is the default code, Press [*] + [8] + Installer Code (default 5555). Two short beeps would indicate that the password is correct and a long beep indicates that it is incorrect.
If you have a correct password, you can proceed with programming the system or can be taken over by Canadian Smart Systems.
If you do not know the current Installer Code, if you have just moved into a new home or business with an existing system, and if the previous owner didn't provide you with the proper information, and the Installer Code is not set to the default, contact origianal installer company if they can change the code or provide a new code. Unfortunately in most cases, replacing the main pannel may be required.
One thing to note is you will only be replacing the main pannel and not all the devices around the property.
Contact Canadian Smart Systems today to get a free consulation.
if you want more it is helpfulhttps://soumissionalarm.ca/