1. Pair your phone. Before beginning, enable Bluetooth on your phone and put it into its pairing mode. See the instruction manual for your phone if you are not sure how to do this.
On the Qolsys IQ Panel 2, press the small grey bar at the top of the main screen and choose Settings > Advanced Settings > enter Master Code (default 1234, but usually changed) > Bluetooth Devices > Add Phone. The panel will begin searching for your phone. If your phone is in its Bluetooth pairing mode, the IQ Panel 2 should find it. The finding process may take a few moments, so be patient.
Once the phone appears, click on the phone name to begin pairing. A pairing code will appear on both the phone and the IQ Panel 2. Make sure they match. Then click pair on the panel. You will be prompted to adjust the disarming settings for that phone. Set the Disarming option to "Allow Disarming". Then click Save at the bottom. You will be taken back to the Bluetooth Devices Menu.
2. Adjust system Bluetooth settings. With Settings. This will take you into the Bluetooth Settings Menu. Make sure the settings for Bluetooth and Bluetooth Disarm are both ENABLED.
You can also adjust the Bluetooth Timeout. The Bluetooth Timeout setting prevents the system from instantly disarming immediately after you arm. That way you can get out of Bluetooth range and go about your day. Then when you return later and have your phone in Bluetooth range, the system will automatically disarm. Selections of 1, 5, 10, 20, and 30 minutes are available for Bluetooth Timeout. The default value is 10 minutes.
Once you have configured the settings, press the return arrow in the bottom-left corner to return to the main screen.
3. Return to home screen. Press the picture of the house at the bottom to exit and return to the home screen. Your changes will be automatically saved.
